Cooler fitting

[Blue]

Can I get a 45 deg fitting to go between cooler & hose?

[Gixer1460]

You can but I don't see what advantage it will give unless you want to kick the pipe out forwards?

[Blue]

The hose is touching the exhaust 

[Gixer1460]

12 hours ago, Blue said:

The hose is touching the exhaust 

And adding a 45 deg bend will put it straight through #3 exhaust!  You need a 12.5 deg bend - not available for larger hose!

I would be either straighten the #4 pipe more vertical, put a dent in #4 or re-centre the cooler to move the pipes away from the exhaust!

[370steve]

you can get 30deg fittings from Torques UK,  just point it more towards the engine to get clearance on down pipe

 

like this 

Edited April 29, 2019 by 370steve

[Blue]

Looks like yours is fitted to the hose

[370steve]

43 minutes ago, Blue said:

Looks like yours is fitted to the hose

thats not mine, just posted it as an example

[Allspeeds]

Steve’s bike wouldn’t have rust on 

[manden]

if you dont have a valve in it, you should have inlet/outlet pointing up

[Gixer1460]

1 hour ago, manden said:

if you dont have a valve in it, you should have inlet/outlet pointing up

Bollux - simple physics - downward facing connections will not drain the cooler unless sump is empty.