-
Posts
3,309 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by 370steve
-
-
its an AN6 mate, just needs cleaning up a bit as the anodize on mine had built up the threads
- 1
-
14 minutes ago, akronos said:
I have a GSX 1100 EF , i found a lot of 530 sprocket but 525....where i can find sprocket of that dimension?
B&C Express
-
22 hours ago, coombehouse said:
If the tooth ratio is 15/47, the gearing is the same regardless of chain size. The 530 525 & 520 chains are all the same pitch too, the chain is just thinner so uses thinner sprockets
Metric Dimensions
Chain Pitch Width Roller Diameter 415 12.70mm 4.88mm 7.75mm 420 12.70mm 6.35mm 7.75mm 428 12.70mm 7.75mm 8.51mm 520 15.88mm 6.35mm 10.16mm 525 15.88mm 7.85mm 10.16mm 530 15.88mm 9.53mm 10.16mm 532 15.88mm 9.53mm 11.10mm 630 19.05mm 9.53mm 11.91mm 632 19.05mm 9.66mm 12.68mm Side plate thickness varies with grade and make of chain. As a rule, 1.5 to 2.6 mm. It is important for safety to join chain with the manufacturers correct Rivet Soft Link or Split Spring Link.
Size, Manufacturer, and grade are often stamped on some of the side plates.- 1
-
looking at it Clive, you might have to swap the two top plug screws for something a little shorter, looks like frame will be close!
- 1
-
-
4 minutes ago, vizman said:
Put it on your block, more surface area to expel heat.......hahahahaha...every little will help
- 1
-
1 minute ago, dupersunc said:
Put it on the head cooler.
i hadnt even thought about that! well spotted young man
-
1 hour ago, Gixer1460 said:
Why does it matter - oil comes out, goes through cooler and goes back to engine - either side will have same effect!
for putting a heat sensor on the engine inlet side.
-
which is the outlet side of the two sump oil cooler connectors?
-
whats up mr?
-
I did
-
36 minutes ago, Blubber said:
A few thoughts;
4) Cams on the right place ( inlet on carbs side )? ( sorry have to ask )
Just a few pointers.
HTH
Which daft twat would do that FFS
-
2 minutes ago, Blue said:
Sorry to hijack but is there a model that has the outlet on the side?
B12
-
I can vouch for Lucky7 quality, did a great job on my seats
- 1
-
hi and welcome in cant help with the head question either
- 1
-
38 minutes ago, Mole28 said:
I have 3 dark anodised ones and 3 plain ones. £80 each if you are interested.
yes please on the dark anodised one, PM sent
-
1 hour ago, Jelly said:
That rail is very nice @Mole28, might need such a thing, where can I reach him?
Found it: https://accbilletengineering.co.za/
let me know if you get an answer please
-
I use these guys a lot
https://www.Eblag.co.uk/usr/teknikr6?_trksid=p2053788.m1543.l2754
-
2 hours ago, Allspeeds said:
I also bagged some superbike disc the rear is a fully floating brembo wich I’m happy with the front are some superbike spec brembo t drives the only problem with them is there not your usual on the market T drives there ones most can’t get there 7mm thick so you you have to run the mega expensive race mono blocks most a mint used set last week at £1400! So I’m dat on the fence weather just to buy a full PFM set for less money
if you dont want the T drives i will take them off you
-
Haha knew that, it is just something that has come into my head, as i have seen other threads/posts on other OSS bikes that have had oil pump up grades done
by using pumps/gears from other Models.
-
As title, is there any other bike gears or pump that have been used to pump more oil?
-
what Clive said
-
6 hours ago, gorbys said:
Anyways, isn't the point of bracing the headstock like this to prevent lateral or twisting motion?
-
13 hours ago, gorbys said:
Thanks, the only thing about that is it doesn't have AS a direct path to the top of the headstock as is optimal I think? I have no idea if it has anything to say in practical use though! I'm sure anything is better than nothing??
If you can work out a better way and still manage to get your tank on, then well done, but with the tank mounts where they are i didnt really see any other way.
all the other frames shown are GSX, which dont have the same mountings!!!
EFE Knee pads
in Air Cooled
Posted
i can only find the one part No for the lower pad (44252-00A00-57S), i have both top and bottom, but the bottom one i got is "Midnight blue" not black like the top one?
does anyone know if there is a different No for the Black pad?