badger

100n/mm spring not 100lbs! My bad. On the chart it says it right. Did look at the racetech sight before. It is an extended arm but it wasn't this bad on stock shock. I'm 80kgs and the bikes about 190. My next trick if figuring out how to take a spring off without killing my self!

Mines 6 inch over. I'm gonna take a punt at 100 lbs spring I think. Will have a look at demon tweeks. There's a load on Eblag but 10mm shorter. £17 posted though! Thanks for the reply dude

29/90! turns out to be a perfectly placed scratch!! Also, can I fit a 10mm shorter spring or does it have to be the same length?

howdy ho! I've hurt my brain, searched a plenty and still stuck. Bought an ohlins shock from a zzr1100, guy had it fitted to a slingy 1100. Turned out the shock was pretty fucked so paid out for an extensive service and turns out its still way to soft. I have discovered that suspension stuff frazzles my noodle. The spring I have is 01091 -23/90. on a chart it doesn't seem to exist. Question being, do I use another suspension linkage or do I need a new, heavier spring? How would I work out what size linkage etc? Amy help would be mucho appreciated. Thanks!

Im hoping to do the july one. Worst track ever though!

Ahhhhhhh!!!!!!!!!!! Bloody ansum! Thanks guys!!! Jacktar01 If you have a fuse box for a gsxr I'll gladly grab it off you! Davecara, Message on route! Thanks!!

That tabs broken

Anyone know if you can get replacement female blade connectors that fit a gsxr fuse box? one of mine won't lock in place I haven't found a replacement fuse box that tickles my fancy

Thats impressively bent! I have a chinesey clicky adjustable one of them if you need another?

What he said! Easy to check. If fuels not getting in it's either gonna be a blocked tap or squiffy floats. Nothing else Really to go wrong!!

If they keep blowing up check your voltage going it to the battery. Eltrobobbins should really blow up on a regular basis

gsxr 1100. 180-60-17. Metmachex swing arm, stock wheel, spacers etc It only just just touches. There was fuck all clearance to begin with though compared to the 180-55

All valid points dude. I'll probably get the spacer machined by a mate. Can use an old sprocket for it I reckon. Should be pretty straight forward/ not my problem

Fuck a duck! I can get a fancy spacer made pretty quick I reckon. Gonna go down that route. Need a new chain really. Fuck me when did that get so fucking expensive?!?

Nice one! Will have a weekend of chopping spacers soon! Thanks guys

Ok, dumb questions but I can't really find a definitive answer. Wanna space out my chain from the tyre, Sorting an offset front sprocket is all easy peasy but an offset rear (calm your self) is fucking impossible. Do I only need to offset the front? Am I being stupid? Can dogs look up? Any pointers would be mucho helpfully

the slides wear and allows the needle to flap about like a witches tit. I put new emulsion tubes and needles in mine and 1000 miles later fucked again. Making them secure really really helps! What oilyspanner said up there is a solid way of doing it!

Nice one! Cheers dude!

Howdy, Well, after sprockets to fit my 1100. 6-10mm should do. Fitted a 180-60-17 tyre and it all got a bit touchy. Was there a zx6r set that worked? I did do a search but didn't find nuffin

cool cool. thanks guys. that'll be the plan of action then. I'll probably need to lose the shock due to the remote bit probably sitting in the way. Ohlins ones don't have those....... giant wedge of cash though

cool cool. I don't know what you mean but im nodding anyhoo There is an air vent system in the seat so will stick the head cooler somewhere appropriate if I can. Lots of planning to do yet

Sticking a ducati panigale supframe on my slingshot and the bottom mount its a bit of a dick. Could I mount to bottom mounts onto the shock mount or is it to much stress in one point? any advice appreciated! Ta

Awesome! Kinda what I had in my head so nice to know I'm the right page. Not 100% sure my scavanger pump is working but oil comes out and it makes noises. Thanks dude

its furry and unclean. Bit like an 80's hooker https://goo.gl/photos/xeaD1mb785B4zrXY9

Ahoy! I've been slowing working on a turbo set up I got from pete field (tripleP) Other than my bike having a systematic hatred of me im pretty much getting there. I do have an oil related question though. It keeps shitting oil out the exhaust and not just a bit. There was a slick down the bike! I've read about people restricting the oil feed to lower volume. I've not seen one on a gsxr though but does anyone have an example of one and how they did it? Or am I wasting my time on it? Will do some pics soon! Cheers guys