Rene EFE
-
Posts
3,607 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Rene EFE
-
-
Can you swap one to the other? I've got a shortstroke motor with a buggered cover so if I can just do a straight swap, that'd be nice
-
11 hours ago, Blubber said:
Atl do them also.
Got a link?
-
I've got the time
-
On 12-7-2017 at 11:38 AM, KATANAMANGLER said:
Welcome back. I have a very mild hankering for an 1100 wp.
Swap for the Slabby?
-
to be fair; to make ANY frontend fit anything else will at most involve a stem- and bearingswap.
-
750L Slingy in mine, totally original. Copes very well with the heavy bike (suprisingly)
-
1
-
-
Should be fairly straight forward with all the bits. Swap over the gearsensor and keep the gearindicator on the dash. Oilcooled motor though; moving your thread
-
1
-
-
2 hours ago, Sandman said:
This is on my christmaslist. No need for experimenting with (expensive) bits from other bikes
-
2
-
-
WET!
-
1
-
-
I am SO jealous. Next year I'll be there again
-
Hello and welcome.
Here's one I did earlier
It's gone now, as the engine shat itself. Bike handles REALLY well with the mods done to it, did 2 runs to the TT.
-
2
-
-
Come say hi, we have stroopwafels
-
2
-
-
10 hours ago, Foz said:
Why ?? You own one Paul !! It just wears shell suit dinosaur clothes
*Spits coffee
-
Does anybody have any or made a set work with Slingshotwheels?
-
Get HD enginecovers instead. I've seen more than a few bikes written off BECAUSE they had crashbungs fitted.
-
2
-
-
No pics before turbo. Welcome
-
-
11 hours ago, Blue said:
Do you think it be ok to make a bracket that'd be held in place by either the cam cover bolts or the cylinder bolts that are used to make cam links?
I wouldn't do it from the camcaps; the treads on those are fragile just doing their job, let alone doing more.
-
1
-
-
-
-
50cc's don't count
-
1
-
-
5 hours ago, bluedog59 said:
From my experience I would say it's not the best choice and will not aid your skills development.
Or did you just not bother ?
My first bike was an EFE
-
2
-
-
Mine is all stock apart from a 5/8-ish offset front sprocket.No mods to frame or arm
-
2
-
-
23 minutes ago, boilerdude said:
Is there a popular swingarm that goes on with the least fuss that people like to use?
No, apart from bespoke swingarms for an EFE, all involve welding.
-
1
-
750 Long/Shortstroke clutchcover interchangability
in Oil Cooled
Posted
I'll just give it a try then. The gasketface is the same, so my guess would be to swap the lot and you're fine. I will report back.