nightrider Posted May 28, 2018 Share Posted May 28, 2018 (edited) I'm putting a donor B12 Motor in a Slabby 11 Roller. B12 Gen. has different connections then Slabby Gen. Can I just throw a 1052 Gen. (which I have loads of) or am I going to have to figure out the different wiring (I don't have a B12 Harness)? Edited May 28, 2018 by nightrider Quote Link to comment
Duckndive Posted May 28, 2018 Share Posted May 28, 2018 1 hour ago, nightrider said: I'm putting a donor B12 Motor in a Slabby 11 Roller. B12 Gen. has different connections then Slabby Gen. Can I just throw a 1052 Gen. (which I have loads of) or am I going to have to figure out the different wiring (I don't have a B12 Harness)? you can bolt the Slabby one on if you swop the gear for the blandit one..... Quote Link to comment
nightrider Posted May 28, 2018 Author Share Posted May 28, 2018 Copy that Duckndive Thank you! Quote Link to comment
Nickel Posted May 28, 2018 Share Posted May 28, 2018 Be aware using the correct iginition pick up plate in combination with the correct cdi. Slabside has double pick up and bandit only single. Quote Link to comment
MeanBean49 Posted May 28, 2018 Share Posted May 28, 2018 57 minutes ago, Nickel said: Be aware using the correct iginition pick up plate in combination with the correct cdi. Slabside has double pick up and bandit only single. You can still use the slabby pickup with bandit cdi, you just use one pickup and leave the other disconected. This post is about generators tho ;-) 1 Quote Link to comment
CockneyRick Posted May 28, 2018 Share Posted May 28, 2018 As DnD says, gear swap & 2 wires. Red to Batt+ Orange to fusebox/switch feed. Quote Link to comment
nightrider Posted May 28, 2018 Author Share Posted May 28, 2018 Thanks CockneyRick All my gear is 1052 so this is the way I'll go. Quote Link to comment
nightrider Posted May 28, 2018 Author Share Posted May 28, 2018 1 hour ago, MeanBean49 said: You can still use the slabby pickup with bandit cdi, you just use one pickup and leave the other disconected. This post is about generators tho ;-) So as I only have 1052 harness & CDI, I should swap out my pick-ups/plate and switch then, Quote Link to comment
CockneyRick Posted May 28, 2018 Share Posted May 28, 2018 If you got one then might as well Quote Link to comment
nightrider Posted May 28, 2018 Author Share Posted May 28, 2018 Oh I have a few of those Quote Link to comment
nightrider Posted May 28, 2018 Author Share Posted May 28, 2018 I have a 1987 750 Gen. with the same Tooth count. I assume I can use this instead? Quote Link to comment
CockneyRick Posted May 28, 2018 Share Posted May 28, 2018 (edited) Should be ok, i know the 7 & 11 are different teeth. Just check depth to be sure Edited May 28, 2018 by CockneyRick Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.