Hayabusa swing arm in EFE

[TrunKz]

Hi guys,

I was asked by a friend today if I'm interested in his Hayabusa swingarm with wheel and accessories.

Has any of you installed a Haya swingarm in the EFE?

 

Best regards

[matt]

I tried, it fits in with some spacers, but due to the bracing on the swingarm it hits on the rear frame rails, unless you jack up the back.

I got to the stage where to get a sensible ride height, I would have had to cut off the frame rails and reposition them , which I didn't want to do, so ended up fitting a 1200 Blandit arm instead. 

 

[Duckndive]

1 minute ago, matt said:

I tried, it fits in with some spacers, but due to the bracing on the swingarm it hits on the rear frame rails, unless you jack up the back.

I got to the stage where to get a sensible ride height, I would have had to cut off the frame rails and reposition them , which I didn't want to do, so ended up fitting a 1200 Blandit arm instead. 

 

you could cut the brace off and weld it back on underneath ....that would get them thinking

[homer]

Busa and 1000 k3 forward swingarms needs frame rail cutting. And they also look odd in efe.

[baldrick]

ive got 2 efes 

I ended up relocating the frame tube on the one that never fitted, but looking back I would remove the brace, narrow it and re-fit it, keeping the frame standard.

 

e2a im talking bollox, only one has a busa arm, the other is gsxr, ive not touched em for about 10 yrs so I blame dementia

 

Edited October 6, 2018 by baldrick