Rear wheel spacing

[caferacerdan]

Anyone know what the issue is here?

I'm running a gsxr750 1995 swingarm in an 88 750 frame, using the 95 wheel spacers and calliper mount.

Chain alignment is good etc but the disc is touching the calliper mount?

 

 

 

[wraith]

I had the same think when I put the gsxr750wr swing arm, wheel etc in my Kat, got the how lot off a breakers who told me it all came off the same gsxr750wr.

I ended up making a new spacer up between the wheel and caliper then triming some of the caliper mount down, it only needed about 3mm to work.

Don't know if the breakers for some bits mixed up  but never got to the bottom of it unless I got new spacers etc and that's if the say wheel is a wr 

but all works now.

[fatblokeonbandit]

21 hours ago, caferacerdan said:

A

 

 

 

 

 

looks like the bracket needs to move to the right as there is a lot of room between the bracket and the swinger in the slot???

Id say the top hat spacer in the RHs of the wheel is to short??

[Rene EFE]

What wheel is it? The oilcooled and watercooled ones are different. 

[caferacerdan]

14 hours ago, Rene EFE said:

What wheel is it? The oilcooled and watercooled ones are different. 

thought the oil cooled wheels were interchangeable with the water cooled models?

[Rene EFE]

They are, with the right spacers and caliperhanger; the offset in the discs is different. 

[fatblokeonbandit]

Ah I see said the blind man, thought from the original post that you had everything from a water boiler, as rene says your wheel is wrong