CockneyRick Posted April 19, 2018 Posted April 19, 2018 Can anyone show me pics of how they mounted their damper to forks & frame please? Has an SRAD front end onto a 750 frame Quote
CockneyRick Posted April 19, 2018 Author Posted April 19, 2018 I like yours, but the top yoke is already modded for me, & have the bits for a fork-frame version Quote
Markz9 Posted April 19, 2018 Posted April 19, 2018 I stuck mine on the left hand side and on the upper frame section Quote
yantosh Posted April 19, 2018 Posted April 19, 2018 ducati 916 damper , changed it for a Ohlins on later rebuilds 1 Quote
CockneyRick Posted April 19, 2018 Author Posted April 19, 2018 55 minutes ago, Markz9 said: I stuck mine on the left hand side and on the upper frame section So half way down fork, & Avdel nut in lower frame triangle Quote
dupersunc Posted April 19, 2018 Posted April 19, 2018 2 hours ago, CockneyRick said: So half way down fork, & Avdel nut in lower frame triangle There's a threaded ally boss welded to the frame. Quote
canamant Posted April 20, 2018 Posted April 20, 2018 (edited) Who needs a steering damper on a 750 frame ? 98-99mph lap in the is at 2013 Classic TT F1 on this with no damper Edited April 20, 2018 by canamant 2 Quote
dupersunc Posted April 20, 2018 Posted April 20, 2018 8 hours ago, canamant said: Who needs a steering damper on a 750 frame ? 98-99mph lap in the is at 2013 Classic TT F1 on this with no damper I agree. Never needed one on mine either. Mark needed one on his as it's mandated it the regs for his championship. Quote
yantosh Posted April 20, 2018 Posted April 20, 2018 tried taking mine off, but it was a wiggly with the 210bhp over the bumps on the Erskine bridge 1 Quote
banoffee Posted April 20, 2018 Posted April 20, 2018 Mine is on there because I like the look of it 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.