canamant Posted April 11, 2018 Share Posted April 11, 2018 Anyone know if a bandit 6 or 12 rear wheel spindle is the same length as a slabby 11 ? Thanks Quote Link to comment
Swirl Posted April 12, 2018 Share Posted April 12, 2018 7 hours ago, canamant said: Anyone know if a bandit 6 or 12 rear wheel spindle is the same length as a slabby 11 ? Thanks What size you after matey, got a few spindles on the shelf Quote Link to comment
canamant Posted April 12, 2018 Author Share Posted April 12, 2018 Let you know later Swirl. Ta. 1 Quote Link to comment
canamant Posted April 12, 2018 Author Share Posted April 12, 2018 (edited) Outside of swingarm measurement is 320mm so spindle bearing surface length needs to be that length. Bit longer would accommodate washers/adjuster markers. Diameter 20mm. Thanks. Edited April 12, 2018 by canamant Quote Link to comment
Swirl Posted April 12, 2018 Share Posted April 12, 2018 Just put me feet up, but I'll go and have a look in the shed shortly Quote Link to comment
clivegto Posted April 12, 2018 Share Posted April 12, 2018 Got one for my 1100 arm recently, pic might help. Quote Link to comment
Swirl Posted April 12, 2018 Share Posted April 12, 2018 Just had a look longset one I've got is 305mm of spindle,plus thread Quote Link to comment
canamant Posted April 12, 2018 Author Share Posted April 12, 2018 Thanks for looking Swirl 1 Quote Link to comment
Morgyz89 Posted September 14, 2022 Share Posted September 14, 2022 @clivegto @Swirl Whats the year and model those 305mm spindles are from and what other models were fitted with it? I purchased a hard tail frame which came with zero information and a Katana 600 donor. Motor fits, but figured out pretty quickly that the rear spindle for the donor bike is too short and smaller diameter. Any help is greatly appreciated. Quote Link to comment
Swirl Posted September 14, 2022 Share Posted September 14, 2022 7 minutes ago, Morgyz89 said: @clivegto @Swirl Whats the year and model those 305mm spindles are from and what other models were fitted with it? I purchased a hard tail frame which came with zero information and a Katana 600 donor. Motor fits, but figured out pretty quickly that the rear spindle for the donor bike is too short and smaller diameter. Any help is greatly appreciated. Not sure, I'm out the country till Xmas so no help I'm afraid. Quote Link to comment
Captain Chaos Posted September 14, 2022 Share Posted September 14, 2022 3 hours ago, Morgyz89 said: a Katana 600 RTFR Quote Link to comment
Swirl Posted September 14, 2022 Share Posted September 14, 2022 14 minutes ago, Captain Chaos said: RTFR True story 3 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.