Markys Posted January 30, 2018 Posted January 30, 2018 (edited) Hi all just after some piston dimensions from either a gs1100 or gsx1100 piston with a compression ratio of 10:25.1 Dimensions im after is piston height from bottom of skirt to top of piston and also from bottom of gudgeon pin hole to top of piston Any info appreciated Edited January 30, 2018 by Markys Quote
Swiss Toni Posted January 30, 2018 Posted January 30, 2018 Morning Markys. Welcome to OSS! Bikes? Projects? Little bit about yourself? Quote
Markys Posted January 30, 2018 Author Posted January 30, 2018 Hey swiss toni Just building a custom 1984 suzuki dr250 vmx racer going bigbore, flatslide 34mm carb, ported head, custom exhaust, bigger valves etc and trying to find a high comp piston and the gsx1100 uses the same piston rings and 18mm gudgeon pin as the old dr250 so im hoping the piston is the same height except for the high comp raised profile Day job Ducati technician.... Quote
vizman Posted January 30, 2018 Posted January 30, 2018 welcome to OSS.info 4 hours ago, Markys said: Day job Ducati technician.... AWESOME.....the shitters' been backed up for ages, you can take a look at it 1 Quote
johnr Posted January 30, 2018 Posted January 30, 2018 take no notice, he's ex royal navy, he always tries to get newbies to look at his shitter, just keep your back to the wall......... 2 Quote
Sheep Posted January 31, 2018 Posted January 31, 2018 My Dad was a former Navy man.....albeit Dutch...that explains a few things!!!!!! I do have some EFE pistons kicking about the shed,would those dimensions do you? Quote
Sheep Posted January 31, 2018 Posted January 31, 2018 Yes they are.....hence the question as to whether they would be ok but not being an exspurt I couldn't tell you if the dimensions will be of any use lol.. Any hoo here is what I have...bottom of skirt to piston top is 54.30mm and bottom of gudgeon pin hole is 37.20mm (20mm gudgeon pin)...27.20mm if you go to the pin centre. Quote
Markys Posted January 31, 2018 Author Posted January 31, 2018 What year model are the efe pistons from? Quote
Dezza Posted February 1, 2018 Posted February 1, 2018 On 30/01/2018 at 11:38 AM, Markys said: Day job Ducati technician.... So you have the dexterity of a gynocologist with 30 years experience and fingers like ET?(To enable the valve shims to be changed on a 4-valve head W/C engine). Quote
Markys Posted February 14, 2018 Author Posted February 14, 2018 Wiseco gsx1100e piston i have got measures up the same as the dr250 piston except for the 2mm oversize and 10.25.1 comp Let the rebuild begin! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.