wraith Posted October 17, 2017 Share Posted October 17, 2017 Just thinking ahead for when new shed is done (if it stops raining so I can get the base down lol). I started a gs550 with a b6 motor in it and when I can get back onto it I was thinking of putting a 4-2 zorst on it. So dose anybody know what zorst will fit and will I need to change the sump? Was thinking gsxr1100 or gsxr750 but cannot think of a 750 with a 4-2 or maybe gsx750f???? Any info. Cheers. Quote Link to comment
Captain Chaos Posted October 17, 2017 Share Posted October 17, 2017 GSX-R 750 J/K has a 4-2 exhaust. Sump pan will need swapping though to fit it on a B6 engine. Quote Link to comment
wraith Posted October 17, 2017 Author Share Posted October 17, 2017 Cheers Captain will keeps my eyes open for both. Quote Link to comment
Captain Chaos Posted October 17, 2017 Share Posted October 17, 2017 Teapot pipes also fit (with sump pan swap) but good luck finding a non-rusted through set. Quote Link to comment
richyrich Posted October 17, 2017 Share Posted October 17, 2017 Ive got a Quill four into two that came on a 750L. But when I put it on that motor in the gs550, it sits really low. Quote Link to comment
wraith Posted October 20, 2017 Author Share Posted October 20, 2017 Would a gsxr1300 Hayabusa down pips fit? Just thinking as I have a set of gsxr1000 on my oilcooled 1127 kat with some tweaking. Quote Link to comment
Gixer1460 Posted October 21, 2017 Share Posted October 21, 2017 11 hours ago, wraith said: Would a gsxr1300 Hayabusa down pips fit? Just thinking as I have a set of gsxr1000 on my oilcooled 1127 kat with some tweaking. Wrong angles, wrong diameter, wrong height - anything else............it'll be wrong! 1 Quote Link to comment
wraith Posted October 21, 2017 Author Share Posted October 21, 2017 OK cheers for the info Quote Link to comment
Del Posted October 22, 2017 Share Posted October 22, 2017 I have a 89-92 gsxr1100k-n 4-2-2 complete system,that should fit okay. I can take some pics/measurements later,if you like ? Quote Link to comment
Gixer1460 Posted October 23, 2017 Share Posted October 23, 2017 13 hours ago, Del said: I have a 89-92 gsxr1100k-n 4-2-2 complete system,that should fit okay. I can take some pics/measurements later,if you like ? .................which will weigh more than the bike LOL! Quote Link to comment
Del Posted October 23, 2017 Share Posted October 23, 2017 (edited) 10 hours ago, Gixer1460 said: .................which will weigh more than the bike LOL! The headers are not heavy,it is the stock cans that weigh abit(and restrictive on the 1100). But I got round that by fitting harpoon cans/link pipes(fireblade on the right and RC30 on the left. Sadly, haven't got these anymore.) Edited October 23, 2017 by Del Quote Link to comment
Gixer1460 Posted October 23, 2017 Share Posted October 23, 2017 You said complete stock system - hence the comment! Quote Link to comment
wraith Posted October 23, 2017 Author Share Posted October 23, 2017 4 hours ago, Del said: The headers are not heavy,it is the stock cans that weigh abit(and restrictive on the 1100). But I got round that by fitting harpoon cans/link pipes(fireblade on the right and RC30 on the left. Sadly, haven't got these anymore.) Pm sent Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.