fatblokeonbandit Posted September 11, 2017 Posted September 11, 2017 £70, and a tim of chum for yhe dog Quote
Reddragon Posted September 11, 2017 Author Posted September 11, 2017 Um how can i put it. NO ! I totally blame you for calling the bloody thing number 13 Quote
Reddragon Posted September 12, 2017 Author Posted September 12, 2017 Made friends with the bandit motor again the crack i thought i saw was a flaw in the casting but i did break the speedo trigger thing on the sprocket so that was where the piece of metal came from anyway its now in the frame 2 Quote
Reddragon Posted September 12, 2017 Author Posted September 12, 2017 Assistant mechanic very happy too and wanted to accept your offer Garry 1 Quote
fatblokeonbandit Posted September 12, 2017 Posted September 12, 2017 20 hours ago, Reddragon said: Um how can i put it. NO ! I totally blame you for calling the bloody thing number 13 I see, it should have been 12b then Anyway crack on Quote
Reddragon Posted September 12, 2017 Author Posted September 12, 2017 12b doesn't really have the same ring to it though Quote
Reddragon Posted September 21, 2017 Author Posted September 21, 2017 Nearly ready to try and fire this up, re the PAIRS system, will it still run ok without it blanked off ? Quote
Captain Chaos Posted September 21, 2017 Posted September 21, 2017 will run but like with 4 leaking exhaust gaskets Quote
Reddragon Posted September 21, 2017 Author Posted September 21, 2017 I'll try and get them blanked off then, i was gonna cut the pipes off and weld up the hole in the middle as a quick fix Quote
Reddragon Posted September 23, 2017 Author Posted September 23, 2017 Bit of redneck engineering on the PAIRS pipes, cut them off and flattened them in the Vice for a quick fix Quote
Reddragon Posted September 23, 2017 Author Posted September 23, 2017 (edited) Then fitted the titanium downpipes from a gsxr 1000 , people say they fit with a bit of brute force, I'd say a lot of brute force Edited September 25, 2017 by Reddragon Quote
Reddragon Posted September 23, 2017 Author Posted September 23, 2017 Tatty powerscreen oil cooler coz that's all i had to hand , filled it with oil, pulled tbe leads and cranked it for about 10 secs 3 times to get some oil around the top end hooked up a car battery and gave each carb a squirt of easy start ............ nothing. Pulled a plug, no spark, checked one on tbe other coil, weak spark . Cleaned the coil terminals, cleaned the earth and wiggled the clips on the battery , tried again a few pops , promising i thought, realised i didn't have the choke out pulled it out pressed the button and vrooooom its alive! 1 Quote
Reddragon Posted September 23, 2017 Author Posted September 23, 2017 No rattles or knocking , popped and banged a bit but its on open carbs and no end can , very happy boy 1 Quote
Reddragon Posted September 23, 2017 Author Posted September 23, 2017 Hopefully there's a video link attached Quote
Reddragon Posted September 23, 2017 Author Posted September 23, 2017 (edited) The smoke was from a weeping oil line banjo Edited September 23, 2017 by Reddragon 1 Quote
Roger P. Posted September 24, 2017 Posted September 24, 2017 14 hours ago, Reddragon said: Bit of redneck engineering on the PAIRS pipes, cut them off and flattened them in the Vice for a quick fix Cut off the PAIR nubs, file flat, tap for 8mm hex bolt. Works fine but don't over torque. Quote
Reddragon Posted September 24, 2017 Author Posted September 24, 2017 I did that to the first one and threadlocked it in place then decided it was quicker to just crush them in the vice Quote
Reddragon Posted November 6, 2017 Author Posted November 6, 2017 Not done much more on this but my bargain hunting skills came into play again when i saw a set of bst36s on the bay advertised as running rich even after cleaning, got them for £27 posted and these are not clean in my book Quote
micktodd Posted November 6, 2017 Posted November 6, 2017 Ive got a punch bag in my garage for anger and the chains it hangs from make a good hoist with couple of ratchet straps ideal for engine fitting been a loner that i am lol seriously good buy though Quote
Reddragon Posted November 7, 2017 Author Posted November 7, 2017 17 hours ago, micktodd said: seriously good buy though I've done really well so far bargain wise, the rolling frame was £250 from fatblokeonbandit already fitted with the banana swingarm and usd forks and came with a box of bits then Engine £51 Loom and CDI £53 Coils £12 BSR36 Carbs £48 Switchgear £18 Pegs,hangers,brake and gear change £17 Downpipes £50 1 Quote
fatblokeonbandit Posted November 7, 2017 Posted November 7, 2017 bugger I should have charged much more!!!!!!!!!!!!!!!!!!!!!! Quote
Reddragon Posted November 7, 2017 Author Posted November 7, 2017 Lol, I actually bid £350 but no one else bid , I figured I'd throw a grand at it and see what I got, but don't reckon I'm gonna get that high 1 Quote
Reddragon Posted March 6, 2019 Author Posted March 6, 2019 Didn't realise how long ago I posted on this, still beavering away in the background but keep forgetting to take pics, I've just torn down the dry build ready for paint powder and polishing, and I'm in it for WAAAAAAY over the initial 1000 budget, partly due to custom yokes and a change to R1 forks , my assistant mechanic is sadly no longer with me , the big C took her in September last year Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.