750 w rear disk diamiter

[Jdeac1981]

Hi all, could someone tell me the rear disk diamiter of the 750w with the top braced swingarm.

cheers jon

[Madb]

240mm.

[Jdeac1981]

Thanks for that. do you think a time bigger disk would still work in the caliper?

[Madb]

Only if you space caliper out. only a few mm clear as standard. What size you thinking?

[Jdeac1981]

The wheel and disk combo I have is using a 245mm disk

[Madb]

Ok. Then best try and see if it works. Or you could have a disc made to fit. someone may be along shortly to advise. 

[Jdeac1981]

Do you have any idea as to who does custom disks.

[Madb]

Not off hand apart from ap or isr.  What wheel you fitting in the back? 

[Jdeac1981]

Fz6 to match as close as possible to the r1 front end.  5.5 inch rear

[jameskat]

I am sure someone with a lathe will be able to skim 5mm off the diameter, dependant on the where the ventilation holes are and if the pad height will still be on the main part of the disc. Sometimes looking through the spare parts catalogue (EBC etc) will show a disc from another model with the required OD and stud pattern.