Steering stems

[Jdeac1981]

Hi all are slabby and slingy steering stems the same???

cheers jon

[Del]

Yep

 

[Jdeac1981]

Cheers again dell. Are you a Suzuki bible lol

cheers jon

[Captain Chaos]

he's more than a bible

[Jdeac1981]

I will be able to start a project thread soon. Well when bloody work allows me to get on with it.

cheer again all

[Jdeac1981]

Would I be right in thinking then that a slabby or slingy stem would press into the appropriate k series bottom yoke??

cheers

[Nickel]

Bottom bearings are the same (32006) but the press fit is slightly different. Slabby or slingy stem is slightly to small to fir the k series bottom yoke.

[Del]

 

On 03/07/2016 at 7:47 PM, Jdeac1981 said:

Would I be right in thinking then that a slabby or slingy stem would press into the appropriate k series bottom yoke??

cheers

You don't need to swap stems on the srad,k-series,busa,tls/r,etc yokes,just needs a bearing swap  and modify the lockstops  

You just need the slabby/ slingshot 32006 bottom bearing and a 32906 bearing,from Marksman,for the top bearing 
http://shop.marksman-ind.com/99-3540-5-30x47x12-taper-roller-bearing-32906-15086-p.asp

Edited July 5, 2016 by Del

[Jdeac1981]

Cool thanks for that. What are the top bearing dimensions??

 

cheers all

[Del]

14 hours ago, Jdeac1981 said:

Cool thanks for that. What are the top bearing dimensions??

 

cheers all

Says the size on the link to marksman  

[Swirl]

Take it this is the same for a srad frontend on a 750 teapot, seems the bearing sizes are the same as a slingy