slabby 750 engine rebuild

[bernardo]

I might be slightly mad but I've decided to rebuild my slabby motor  rather than dropping an 1100/1200 in.

Now I think I can source most of the parts off the net, but can anyone recommend a good crank recon service?

Also reasonably priced discs and an exhaust are hard to find any suggestions?

In fact any recommendations for parts in general?

thanks

 

Bernard 

[Swiss Toni]

Chris Applebee, Roger Upperton.

 

[Del]

5 hours ago, bernardo said:

Also reasonably priced discs

I have a good pair of gsxr750f/g(750h were different) discs for sale

 

[gsxr884]

SEP in Kegworth for crank and cams regrinds

[bernardo]

Thanks Guys just what I was looking for, Del you have pm

 

Bernard

[canamant]

750 cranks usually very reliable.  Regrind would require thicker shells which are not listed.  The different coded shells are for manufacturing tolerances not for regrinds.  Unless of course any specialists have had batches of shells manufactured.

 

[nightrider]

Well, I haven't ever had the need to recondition a 750 crank (1052 yes). Are the main journals out of spec?

My local car crank specialist tracked down some Suzuki Samurai shells that worked quite nicely for my 1052 main journals that were out of spec.

However 750 cranks are pretty easy to get hold of threw here, brakers or eblag.