Dave Posted March 10, 2016 Share Posted March 10, 2016 My next job I would like to do is clean the Oil pan and gauze filter on my GS850g before doing my next oil change. It is fitted with a Motad 4 into 1. Is it possible to remove the oil pan without removing the exhaust pipes. I see there is slight clearance but not sure if it is enough? Quote Link to comment
Rimotu66 Posted March 10, 2016 Share Posted March 10, 2016 If its similar to GSXR1100 then I doubt it because of the oil strainer/pick up and it really will make the job a lot easier to remove the exhaust. 1 Quote Link to comment
wraith Posted March 10, 2016 Share Posted March 10, 2016 You can get it off with the zorst down pipes still on, but you will find it easier to take it off and zorst gasket's are only about £8 for all 4. Quote Link to comment
Peterrr Posted March 11, 2016 Share Posted March 11, 2016 I would take the exhaust off too so I'd have enough room to remove old gasket etc Quote Link to comment
Captain Chaos Posted March 11, 2016 Share Posted March 11, 2016 and while the exhaust is off, install a turbo. 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.