Clive's JMC Frame

[clivegto]

Slots cut in the spacers forks fitted to yokes.  

[ColinH]

Lovely looking frame there, will follow with interest 

[clivegto]

Head stock bearings arrived today. To fit the eccentric head stock stem I made a couple of spacers up as it's too long. I'll get a shorter one made up later also the top head stock has slight damage where it holds the bearing which needs a repair. Fitted the forks for mockup.    

[Duckndive]

16 hours ago, clivegto said:

Head stock bearings arrived today. To fit the eccentric head stock stem I made a couple of spacers up as it's too long. I'll get a shorter one made up later also the top head stock has slight damage where it holds the bearing which needs a repair. Fitted the forks for mockup. 

That looks very upright " i guess it's the way frame is sitting"

Edited yesterday at 11:24 AM by Duckndive

[clivegto]

3 hours ago, Duckndive said:

That looks very upright " i guess it's the way frame is sitting"

Yes. 

[gsx]

Don't look like there's much lock to lock but maybe camera angle 

[clivegto]

This is what I'm going to work from for the angel of the dangle. Forks do look steep maybe just need to be longer. 

[ColinH]

32 minutes ago, clivegto said:

This is what I'm going to work from for the angel of the dangle. Forks do look steep maybe just need to be longer. 

It won’t be a slouch with that nice steep angle 

[clivegto]

3 minutes ago, ColinH said:

It won’t be a slouch with that nice steep angle 

Might be a bit wobbly at high speed when coming on boost though 

[ColinH]

Just now, clivegto said:

Might be a bit wobbly at high speed when coming on boost though 

 Could be a bit twitchy 

[stockcar]

Didn’t think they twitched that much with the wheel in the air………

[Dezza]

Does the bike in the picture above have adjustable yokes/headstock? I'm puzzled as to why the forks aren't parallel to the headstock?

[clivegto]

3 hours ago, Dezza said:

Does the bike in the picture above have adjustable yokes/headstock? I'm puzzled as to why the forks aren't parallel to the headstock?

No idea @Spikewill know? 

12 hours ago, stockcar said:

Didn’t think they twitched that much with the wheel in the air………

Touch down might be interesting. 

[clivegto]

7 hours ago, Dezza said:

Does the bike in the picture above have adjustable yokes/headstock? I'm puzzled as to why the forks aren't parallel to the headstock?

Look parallel to me now I've had another look see 

[clivegto]

Did a loose mockup for the angel of the dangle, swinging arm at 14° rake is 24.5° stood like this