Jump to content

Starting problem


Recommended Posts

Ok all, think I know where to go on this but just going to run it by you lot 

B12 engine. Running 100% last week, came to go out on it today and it wouldn't start, turns over then a big back fire from the exhaust, then the starter clutch goes clunk.

I've removed the atu cover and all looks ok in there, and I've removed the starter clutch cover and all looks well in there. Next is to remove cam cover and check timing.

Or should I be looking at carbs.

Link to comment
17 minutes ago, fatblokeonbandit said:

is the sump full of petrol????:)

No, nice oil in there, drained it earlier this evening.

And yes have a spark, not the strongest one I've ever seen but a spark on all 4 cylinders and all the same strength.

One plug came out wet and the others where dry. Fuel in the float bowls, so could be pilot jets.

It's my folt, I was just thinking that in the next week or so I will do the winter service, check tappets etc xD so jinxed myself :D

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...