spiderpig Posted July 2 Posted July 2 (edited) Can anyone help me out and identify these fittings from my pile of bits I've -8 goodridge lines which these definitely are not fitting... Measuring od 22.5mm, id 13.5mm, 1.75 thread. So am I right in thinking I need a 5/8 bsp to an8 reducer?? Edited July 2 by spiderpig Quote
dupersunc Posted July 2 Posted July 2 (edited) Yep bsp. You can get bsp fitting for -8 line do no need for adaptors. Edited July 2 by dupersunc Quote
Dezza Posted July 2 Posted July 2 Don't bother with adaptors. Sell the BSP cooler to a car person and buy an AN cooler. Adaptors are expensive and will also reduce clearance by spacing the cooler fittings further out from the cooler. 1 Quote
spiderpig Posted July 2 Author Posted July 2 That's what I'm thinking. Adaptors seem to be extremely thin on the ground in those sizes, like non existent. Will flog it and pick up an AN one Quote
spiderpig Posted July 2 Author Posted July 2 1 hour ago, dupersunc said: Yep bsp. You can get bsp fitting for -8 line do no need for adaptors. Only finding -10 Quote
Kamikaze Posted July 7 Posted July 7 On 7/2/2024 at 3:28 PM, Dezza said: Don't bother with adaptors. Sell the BSP cooler to a car person and buy an AN cooler. Adaptors are expensive and will also reduce clearance by spacing the cooler fittings further out from the cooler. What Dezza said, sell it and get a AN one....Setrab do some really good and affordable coolers Quote
spiderpig Posted July 11 Author Posted July 11 New cooler on its way Next question, crush washer or ptfe on the sump fittings? Quote
Dezza Posted July 12 Posted July 12 On sump and coolers I have always used either copper or aluminium washers and never had any problems 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.