spiderpig Posted July 2 Share Posted July 2 (edited) Can anyone help me out and identify these fittings from my pile of bits I've -8 goodridge lines which these definitely are not fitting... Measuring od 22.5mm, id 13.5mm, 1.75 thread. So am I right in thinking I need a 5/8 bsp to an8 reducer?? Edited July 2 by spiderpig Quote Link to comment
dupersunc Posted July 2 Share Posted July 2 (edited) Yep bsp. You can get bsp fitting for -8 line do no need for adaptors. Edited July 2 by dupersunc Quote Link to comment
Dezza Posted July 2 Share Posted July 2 Don't bother with adaptors. Sell the BSP cooler to a car person and buy an AN cooler. Adaptors are expensive and will also reduce clearance by spacing the cooler fittings further out from the cooler. 1 Quote Link to comment
spiderpig Posted July 2 Author Share Posted July 2 That's what I'm thinking. Adaptors seem to be extremely thin on the ground in those sizes, like non existent. Will flog it and pick up an AN one Quote Link to comment
spiderpig Posted July 2 Author Share Posted July 2 1 hour ago, dupersunc said: Yep bsp. You can get bsp fitting for -8 line do no need for adaptors. Only finding -10 Quote Link to comment
Kamikaze Posted July 7 Share Posted July 7 On 7/2/2024 at 3:28 PM, Dezza said: Don't bother with adaptors. Sell the BSP cooler to a car person and buy an AN cooler. Adaptors are expensive and will also reduce clearance by spacing the cooler fittings further out from the cooler. What Dezza said, sell it and get a AN one....Setrab do some really good and affordable coolers Quote Link to comment
spiderpig Posted July 11 Author Share Posted July 11 New cooler on its way Next question, crush washer or ptfe on the sump fittings? Quote Link to comment
Dezza Posted July 12 Share Posted July 12 On sump and coolers I have always used either copper or aluminium washers and never had any problems 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.