XzoB12 Posted February 6 Posted February 6 Got an 02 with the 36’s , going to install a K&N and FreeFow exhaust. Has 15 pilots ,100 mains , I want to shim the slides as well. My questions are how much more pilot would be needed , if any, and Size of main jet to start off with. And how large are the shims..TIA… Quote
wraith Posted February 6 Posted February 6 Shouldn't need a different pilot jet just maybe a small turn out. Main jet, try 150 (Dyno jet, as different makes are a different size) Think the needle has groves to alter it. Quote
manden Posted February 8 Posted February 8 I would go with 117.5 or 120 main jet and maybe an 1/8 out on the pilot. Should make it crisp and beefy Quote
clivegto Posted February 10 Posted February 10 150 main jets lift needles to top 3 1/4 turns out with twin ram air filters on one of my'n and if you do need to go higher use little washers. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.