Dennis Posted January 13 Share Posted January 13 old skull guru's I'm new to the site and need your help please will a bandit swing arm fit into a GSX1100 EF? if its a straight swap is there a particular generation of bandit that will fit? Can anyone recommend a straight swap from any model/year TIA Quote Link to comment
wraith Posted January 16 Share Posted January 16 Have seen quite a thought with MK1 b12 arms. I've not done it myself so can't say what's needed but it has been done. Quote Link to comment
Duckndive Posted January 16 Share Posted January 16 On 1/13/2024 at 11:04 PM, Dennis said: old skull guru's I'm new to the site and need your help please will a bandit swing arm fit into a GSX1100 EF? if its a straight swap is there a particular generation of bandit that will fit? Can anyone recommend a straight swap from any model/year TIA If you mean GSX1100 EF "full Floater" Then nothing is a straight swop ..... This is OSS and the answer is anything will fit "with modification" 2 Quote Link to comment
Rene EFE Posted January 17 Share Posted January 17 Personal opinion; stay away from the Bandit arm. Way too short. Find GSXR 1100L/M arm and go with that. Top and bottom mounts will need welding, as per suggestion above. Swap the bushings from the EF-arm into the GSXR arm to save yourself time, money and a headache. Makes it go round corners as well 4 Quote Link to comment
DaveV65 Posted January 17 Share Posted January 17 Rene, what front end do you have on that? That's a bit more than a corner! Quote Link to comment
DaveV65 Posted January 17 Share Posted January 17 Now I'm sure I've seen that baby in a magazine somewhere. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.