Dennis Posted January 13 Posted January 13 old skull guru's I'm new to the site and need your help please will a bandit swing arm fit into a GSX1100 EF? if its a straight swap is there a particular generation of bandit that will fit? Can anyone recommend a straight swap from any model/year TIA Quote
wraith Posted January 16 Posted January 16 Have seen quite a thought with MK1 b12 arms. I've not done it myself so can't say what's needed but it has been done. Quote
Duckndive Posted January 16 Posted January 16 On 1/13/2024 at 11:04 PM, Dennis said: old skull guru's I'm new to the site and need your help please will a bandit swing arm fit into a GSX1100 EF? if its a straight swap is there a particular generation of bandit that will fit? Can anyone recommend a straight swap from any model/year TIA If you mean GSX1100 EF "full Floater" Then nothing is a straight swop ..... This is OSS and the answer is anything will fit "with modification" 2 Quote
Rene EFE Posted January 17 Posted January 17 Personal opinion; stay away from the Bandit arm. Way too short. Find GSXR 1100L/M arm and go with that. Top and bottom mounts will need welding, as per suggestion above. Swap the bushings from the EF-arm into the GSXR arm to save yourself time, money and a headache. Makes it go round corners as well 4 Quote
DaveV65 Posted January 17 Posted January 17 Rene, what front end do you have on that? That's a bit more than a corner! Quote
DaveV65 Posted January 17 Posted January 17 Now I'm sure I've seen that baby in a magazine somewhere. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.