BlatantNoobery Posted October 13, 2023 Posted October 13, 2023 Hey all, I'm rebuilding the top-end of a GS850, and really do not want to take apart the bottom end. However, I figure since i've had the jugs off that at least some small amounts of debris, pieces of gasket, etc, might have fallen into the crank case. I can see very little "bits" past the crank sitting at the bottom of the case that i've love to be able to get out with out disassemble. What would y'all do? Quote
Gixer1460 Posted October 13, 2023 Posted October 13, 2023 If the top end is off then sploshing diesel over crank and around the cases with either drain plug out or (for more mess) with sump pan off - will get it squeeky clean and won't hurt anything - all obviously AFTER you've dropped the oil and filter! Quote
wraith Posted October 13, 2023 Posted October 13, 2023 Sump off, then you can see more inside the bottom end then wash out as above Quote
BlatantNoobery Posted October 13, 2023 Author Posted October 13, 2023 Thanks, Wraith! You haven't steered me wrong yet. I'll be doing that this weekend and hopefully getting everything back together! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.