E T Posted August 18, 2023 Posted August 18, 2023 Does anyone know of any major differences between the s & r motors ? A friend needs a motor for her TL1000s, i've been offered R motor. Will the throttle bodies etc fit. Am i right in thinking its cams and ecu that are main differences? Quote
Safra Posted August 25, 2023 Posted August 25, 2023 Use the the parts microfiche for both motorcycles to crossreference alot of the time they will use the same picture with different models sometimes they change the part number even though the part hasn't changed "superseded" Quote
Upshotknothole Posted August 25, 2023 Posted August 25, 2023 I always thought the main difference was the first year S was an unrestricted engine, after that the S and the R both got mildly restricted along with the busa and all the liter bikes. Rs might have hotter cams as well, but not sure. Quote
fatblokeonbandit Posted August 26, 2023 Posted August 26, 2023 My S was red My R was Blue and white ill get me coat 2 Quote
TLRS Posted August 31, 2023 Posted August 31, 2023 TLS throttle bodies will fit. Fitting S oil cooler will need drilling and tapping in the cases. Clutch pushrod might need looking at as there are three versions (5 and 6 spring cable, 6 spring hydro). Iirc ‘97s had a two wire gear pos sensor, TLR 3. Waterpump housing is different but should swap over. Iirc cams are different. Forged pistons. Heads can be O port or D port on a S. TLR always D port. Quote
Matt-Man Posted November 5, 2023 Posted November 5, 2023 Still need advice on this? Both my TLS' have R engines fitted. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.