Gen.1 750F cams in bigger engine

[Blower1]

Are 750F dot head cams usable in bigger engines?

I´m making a 1327cc street engine with dot head and I would like the engine not choke due to too small cams.

I would like to use the Suzuki factory cams and get about 150 hp from the rear wheel.

[wraith]

The gsx750f are not much cop, you really need gsxr cams or gsx1100f cams.

I'm told 

[Gixer1460]

Big bore GSX with dot head - interesting combination! IMO stock cams, even the better ones are much of a muchness, none stand out ! Even the best ones are liable to be lift limited with those lungs to fill!

[clivegto]

Yes they fit. 

[NipsuGoesRace]

I have made some cam comparison with a engine analyzer software. If I remember correct these early gsx750f have same cams than gsxr750 85-87. Analyzed engine specs was 1216cc, 28.5mm in and 26mm ex valves, flowed head, 9.7cr, 42mm throttle bodies and open headers. gsxr750 1990 cams are gsxr1100 89-90 inlet cam and 750 85-87 exhaust cam.