clivegto Posted January 14, 2016 Share Posted January 14, 2016 Am looking into big boring a gsx 750 es on the cheap, so am wondering what the gudgeon pin size is ? I know the 750 es pistons are 63mm and slabby 750 is 70mm according to what I have read, but don't know the pin size. Quote Link to comment
Gsxrsam Posted January 14, 2016 Share Posted January 14, 2016 thought ya had spare bandit/gsxr motor? 1 Quote Link to comment
clivegto Posted January 14, 2016 Author Share Posted January 14, 2016 I do Sam. Quite like the look of the little es in the pop kat. Quote Link to comment
clivegto Posted January 15, 2016 Author Share Posted January 15, 2016 Should I maybe have put this in oil cooled ? Quote Link to comment
vizman Posted January 15, 2016 Share Posted January 15, 2016 (edited) sorry clive, I put it in aircooled as it said 750es...i'll put it back into oil cooled if you like?....[mixin' up the medicine just confuses me] Edited January 15, 2016 by vizman Quote Link to comment
Captain Chaos Posted January 15, 2016 Share Posted January 15, 2016 750 ES is aircooled, leave it here Quote Link to comment
clivegto Posted January 19, 2016 Author Share Posted January 19, 2016 Was not really sure where to put this my self as it looks air cooled to me but I have read that it has more in common with the oil cooled motors, that don't really matter to me. But I have got hold of a 750es piston without stripping the good motor and the gudgeon pin appears to be 18mm. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.