DeegzARG Posted July 28, 2023 Share Posted July 28, 2023 (edited) Hi Thoughts on any good fuel valve replacements for a 78 GS1000? I bought a cheapo one from Amazon but a component inside broke!! Do you folks know of any good replacements? Edit: i found a pingle fuel valve locally but I have to rebuild it and it doesn’t have a vacuum inlet. Would that be an issue? all the best thank you carlos Edited July 28, 2023 by DeegzARG Quote Link to comment
Gixer1460 Posted July 28, 2023 Share Posted July 28, 2023 (edited) 5 hours ago, DeegzARG said: Edit: i found a pingle fuel valve locally but I have to rebuild it and it doesn’t have a vacuum inlet. Would that be an issue? Depends if you don't have a memory span longer than a goldfish and remember to a) turn it on before riding off and b) turning it off after you've finished! If you have good sealing float valves in the carbs, turning the tap off isn't so important, but if not any tap will usually be a problem! Edited July 28, 2023 by Gixer1460 1 Quote Link to comment
DeegzARG Posted July 29, 2023 Author Share Posted July 29, 2023 (edited) Thanks Gixer1460! I believe the float valves are good, they were functioning well the last time I set them. Other than remembering to shut the valve off any other issues I should be worried about? Is it a matter of simply plugging the vacuum port on the carburetor and switching the petcock? has anyone done this operation? Any thoughts on it? Edited July 29, 2023 by DeegzARG Quote Link to comment
Gixer1460 Posted July 30, 2023 Share Posted July 30, 2023 Its not an issue - and reaching under the tank becomes second nature after a while! Quote Link to comment
slayer61 Posted July 31, 2023 Share Posted July 31, 2023 My bike has the stupid "BATTERY" light always lit. As a reminder to turn the petcock off I put a "FUEL" sticker right over it as a reminder to turn it on/off goldfish approved! Quote Link to comment
Rijko Posted July 31, 2023 Share Posted July 31, 2023 (edited) The vacuum operated ones are sometimes left on prime, and will leak when old. Any manuel one like a Pingel left on, can be a problem. Both may result in a puddle on the floor and/or fuel in the engine oil. An ideal combo with either i think, is to mount an electronic fuel valve. Switches on when contact is on, switches off when contact is off. Ideal for a goldfish memory like mine Edited July 31, 2023 by Rijko 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.