Sidewinder systems

[Prime]

Gents (and any ladies)

so I have a oil burner in an efe frame 

currently has a Vance and Hines sidewinder on.

I’d like to keep to that style and seeing as Vance and Hines systems

are no longer available new.

before I go making my own stainless set,

has anyone respaced a Murray, brocks etc, system from a gsxr1000 or busa etc etc to suit? 
Ideally want a stainless set up due to using the bike daily and obviously destroys chrome. 
 

I’ve seen people use headers off gsxrs and as such before but they hang low iirc etc and they’re not the style I’m wanting.

Ta 

[bluedog59]

TBH, with a bike that tidy you're better off biting the bullet and getting a pipe made exactly how you want. A reworked pipe off something else will struggle to look right and it will end up bugging you.

[wraith]

That looks well

[DAZ]

That et light looks nice 

[Duckndive]

This is normally referred to as my "Blue Bike" or Suzi_1 its a bit triggers broom having appeared in many guises 

Current guise with N/A 1216 Oil Boiler Motor  Zorst in Pics is a Vance & Hines Sidewinder from a GSX 1100...Its tight to the frame but a miss is a miss

all that's need to fit to the motor is small reduction of the pipe flange into the head....

Last Pic is Previous Guise 1428cc Road Ridden Big Block EF Motor ...Same pipe Different Engine 

[Prime]

18 minutes ago, Duckndive said:

This is normally referred to as my "Blue Bike" or Suzi_1 its a bit triggers broom having appeared in many guises 

Current guise with N/A 1216 Oil Boiler Motor  Zorst in Pics is a Vance & Hines Sidewinder from a GSX 1100...Its tight to the frame but a miss is a miss

all that's need to fit to the motor is small reduction of the pipe flange into the head....

Last Pic is Previous Guise 1428cc Road Ridden Big Block EF Motor ...Same pipe Different Engine 

Cheers fella 

interesting to know, it seems unless I can get a good second hand one however they cannot be bought anywhere new now.

I’ve looked into having mine dipped and rechromed which might be the way to go in a minute before it’s past that 

fingers crossed it’s not to late already 

Edited January 21, 2023 by Prime

[DAZ]

If you find a chromers that'll replace a used exhaust please let's know as most aren't interested in case anything is left internally that might pollute their tanks 

[Prime]

6 minutes ago, DAZ said:

If you find a chromers that'll replace a used exhaust please let's know as most aren't interested in case anything is left internally that might pollute their tanks 

Doug Taylor metal finishing in western-super-mare.

assuming that is you are in the UK,

hes happy to do it.

(Only one I found that would mind you as like you said)

[DAZ]

33 minutes ago, Prime said:

Doug Taylor metal finishing in western-super-mare.

assuming that is you are in the UK,

hes happy to do it.

(Only one I found that would mind you as like you said)

Cheers long way from South Yorkshire,but I'll keep him saved in case it comes to it