Gear selector rods

[Kevref]

Hi guys rebuild time on my 77 gs750. When installing  the gear selector rods, does it matter where on the selector drum the location pins go? ( arrowwd here in the pic)

or can they locate within the drum location slots anywhere?

[wraith]

Yes, RTFM 

They wil only work in the right place, it looks right from what I can tell on your pic but check the manual

[Kevref]

Thanks thats  a pic of before I took them out . Will replace in same position 

Edited February 13, 2022 by Kevref

[TonyGee]

I  put the selector drum in the neutral position first, then drop the gears in, when you put the crankcases together then check all the gears are their before you go any further  

[Kevref]

Thanks Tony neutral is when the dimple on the selector drum locates on the plunger rod yes? 

[TonyGee]

24 minutes ago, Kevref said:

Thanks Tony neutral is when the dimple on the selector drum locates on the plunger rod yes? 

its the wheel and spring you can see in your pic, it sits on the smallest dimple on the selector drum cam. 

[Swiss Toni]

Neutral is when plunger is in selector drum detent. Move gears to neutral position also. Be careful selector forks engage in tracks on gear train when mating cases. DONT FORCE ANYTHING!If cases hang up, see what’s wrong. As Tony says, check you’ve got all gears, and crank revolves when cases together. Bolt up, and check again.