Gammaboy Posted December 6, 2015 Posted December 6, 2015 Are they really a different spacing to air/oil engines? The WP750 I've bought in bits is minus its carbs because the previous owner has fitted them to his EFE (along with the front and rear ends) Quote
bluedog59 Posted December 6, 2015 Posted December 6, 2015 Yep, they're different but I think there is a way round it with an inlet rubber swap. Quote
Gammaboy Posted December 6, 2015 Author Posted December 6, 2015 Ok, well I guess i'll have to hunt down a set of 750 or 1100 W carbs... pain, but no biggy. Quote
fatblokeonbandit Posted December 7, 2015 Posted December 7, 2015 Here you go , I stupidly bought a set ( Eb*y whilst drunk didn't read it right) ages ago and as you can see they don't fit, I did try every configuration of rubbers.. Apparently the trick was to fit 2 of the oil cooled rubbers upside down, Buggered if I could make it work. tried them all ever which way and couldn't make them work, so reverted to oil colled carbs 1 Quote
fatblokeonbandit Posted December 8, 2015 Posted December 8, 2015 38,s i think?? they are in a box somewhere in the garage.. ill have a look Quote
fatblokeonbandit Posted December 8, 2015 Posted December 8, 2015 yes they are 38mm, a few screws missing I have pinched for other carbs, never used so will need a good clean, but then they will be cheap, make me an offer Quote
kartras Posted October 25, 2016 Posted October 25, 2016 Did you get rid of those 38 mikunis for the water-cooled gsxr??? I may be interested Quote
kartras Posted October 26, 2016 Posted October 26, 2016 10 hours ago, Gammaboy said: Yeah, still got them. I am looking for a set for my 750wp 1993 street fighter project Do you still want to get rid of them? Where are you located and would you post to Australia? Age/ condition? How many miles on them? what model are they off? Were they working when removed? I have a set , but the cost of refurb is almost as expensive as an alternative replacement set Pm me if you want to do a deal , Cheers Karl Quote
kartras Posted October 26, 2016 Posted October 26, 2016 Just now, kartras said: I am looking for a set for my 750wp 1993 street fighter project Do you still want to get rid of them? Where are you located and would you post to Australia? Age/ condition? How many miles on them? what model are they off? Were they working when removed? I have a set , but the cost of refurb is almost as expensive as an alternative replacement set Pm me if you want to do a deal , Cheers Karl 10 hours ago, Gammaboy said: Yeah, still got them. Just noticed on your profile you are in Aus, Where bouts? I'm on the sunshine coast. Quote
Captain Chaos Posted October 26, 2016 Posted October 26, 2016 1 hour ago, kartras said: Just noticed on your profile you are in Aus, Where bouts? I'm on the sunshine coast. What a nice coinsidence. Gammaboy lives in Brisbane. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.