Jump to content

kartras

Members
  • Posts

    14
  • Joined

  • Last visited

Reputation

1 Neutral

About kartras

  • Birthday December 25

Personal Information

  • Location
    Australia

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Just noticed on your profile you are in Aus, Where bouts? I'm on the sunshine coast.
  2. I am looking for a set for my 750wp 1993 street fighter project Do you still want to get rid of them? Where are you located and would you post to Australia? Age/ condition? How many miles on them? what model are they off? Were they working when removed? I have a set , but the cost of refurb is almost as expensive as an alternative replacement set Pm me if you want to do a deal , Cheers Karl
  3. Did you get rid of those 38 mikunis for the water-cooled gsxr??? I may be interested
  4. Well got her idling all good eventually....gunked up pilot jets . and it wasn't long ago that I checked them out. Anyhoo moving on goto spend some time now with the family for the last bit of the easter weekend and earn some brownie points so I can sort a small fuel leak and start tuning her up. she don't sound too bad either with the Laser exhaust either.
  5. If it dies completely would I have more than 1 blocked as it doesn't splutter or cough it just dies completely. surely it would idle if only on 3 cylinders? or would it
  6. Gotta pull the Carbs off again and check the pilot system air and fuel . can't get started on checking the main jets and needle positions until i get the idling sorted. Thanks for the input guys it confirms my thoughts on whats up. knew feck all about carbs "the dark art" before this exercise but now know a bit more than feck all.
  7. Yeah had the ultra sonically cleaned. Just wondering if the pilot air jets are gunked up though. Better check that I suppose.
  8. Factorypro stage 3 kit fitted.#147.5 jet , 3rd clip on needle and fuel screw 2.5 out and started the ole girl.Eventually she coughed to life although a bit rough on the choke. And again as soon as she get some throttle she dies.I did notice if I get her off the choke and give her some throttle over 2.5k she responds to the throttle but only if I keep the revs up. If I let the revs drop she dies.So she won't idle properly she dies a death without the choke or below 2.5k.....would this be anything to do with the pilot jet? Or any other ideas how to resolve?Cheers in advance guys
  9. ok so off with the carbs again....again.....again and lets see where we get...cant get much worse than where i am.
  10. yeah it does Captain Chaos but i don't really know where to start. which jet first ? new needles and which needle height? I guess i should just fit the middle jet and fit new needles at mid height and see where it goes.
  11. Hi Guys, another question bout tuning the ole carbs off a Gsxr750 wp "93 Anyone had any experience with fitting a factory pro stage 2 kit (me thinx) with BMC pod filters . I have removed the ole air box and fitted the pods and the ole girl won't get off the choke. She starts on choke but as soon as I give her some throttle on the stand the stutters to a halt but starts up no probe on the choke again. The carbs have been cleaned and a new seal kit throughout. float heights set as per manual (to the best of my ability) and the rest of the carbs are stock. I have a kit from factory pro which was advised for with the pod filters but i don't know where to start with jetting etc. Hopefully thats where someone here may be able to help, Can anyone give advice as to where to start with jet sizes needle heights etc as to be quite honest i don't know too much about carbs/tuning etc and can't even drive her at the mo as she won't come off choke . I know everyone say don't do the pod filter thing... but too late here to go back. Hopefully it is something I can sort myself as I would like to learn and too skint o pay for someone to sort. Cheers , karl
  12. thanx for the info guys... if I do go bigger on the rear do i need a longer chain over the standard 108 links
  13. G'Day gentlemen and ladies.Just wondering which chain and sprockets might be best for my said motorcycle. 530 or 520 standard or conversion and what about sprocket teeth numbers??? mid change out from standard to a street fighter at the moment and thought I may check in and see what others are using or their recommendations for my bike, Any hoo thanx in advance
×
×
  • Create New...