GS1000 1978 smaller rear caliper

[busa1300]

This is from my Left for Dead GS1000 project

GSX 1150 rotor, GSXR caliper, GS1000 rear hub, GS1100 swingarm, and I think the GS1000 caliper mount redrilled

 

[Highwaystar]

On 12/6/2021 at 12:11 PM, Mike711 said:

Very neat, are you using the OE master cylinder & does it work ok? I fitted a 16mm clutch cylinder on the left handlebar to operate the back brake & it's probably better than the front!

Using standard master which us pretty dire ! I Just made the caliper adjustment purely to look better. I have a gsxr nissin master cylinder on the front pared up to a twin pot SV tokico 

[Mike711]

32 minutes ago, Highwaystar said:

Using standard master which us pretty dire ! I Just made the caliper adjustment purely to look better. I have a gsxr nissin master cylinder on the front pared up to a twin pot SV tokico 

That is very tidy, great work sir!

[Reinhoud]

I've got it like this.

Made up a spacer for the rear axle, got some 5 or 6 mm plate, and made the calliper on that, and welded that plate to the spacer of the rear axle