paddle Posted March 12, 2021 Posted March 12, 2021 Is it out ok to take liners out and use them in different block.the cylinders I just took off my project bike are rusty and pitted but I do have a decent set in an old block I have.is it ok to do this Quote
wraith Posted March 12, 2021 Posted March 12, 2021 Why not just use the hole spare block with the good liner's instead of swapping them? Or is the spare block f##ked? Quote
paddle Posted March 12, 2021 Author Posted March 12, 2021 33 minutes ago, wraith said: Why not just use the hole spare block with the good liner's instead of swapping them? Or is the spare block f##ked? Sorry didnt mention it's got alot of fin damage 1 Quote
clivegto Posted March 12, 2021 Posted March 12, 2021 I have swapped them, jest heat the block up in the oven, the liners will just about fall out. Quote
paddle Posted March 12, 2021 Author Posted March 12, 2021 1 hour ago, clivegto said: I have swapped them, jest heat the block up in the oven, the liners will just about fall out. Excellent thanks Quote
Swiss Toni Posted March 12, 2021 Posted March 12, 2021 2 hours ago, clivegto said: I have swapped them, jest heat the block up in the oven, the liners will just about fall out. And when you press them back in your un-damaged block, put a weight on top of them as they cool, to stop ‘creep’! Quote
paddle Posted March 12, 2021 Author Posted March 12, 2021 38 minutes ago, Swiss Toni said: And when you press them back in your un-damaged block, put a weight on top of them as they cool, to stop ‘creep’! Ok thanks for the info Quote
wraith Posted March 12, 2021 Posted March 12, 2021 And then give them a quick homing in, so they are still true to the pistions Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.