Pd1987 Posted July 5, 2015 Share Posted July 5, 2015 So I have a slabby 750 which I have a set of 38mm carbs for, it has a micron 4-2-1 system on and has ram air filters on. So need a suggestion on what jets to use I think it has 150's in at the min Quote Link to comment
canamant Posted July 5, 2015 Share Posted July 5, 2015 38mm CVs ? Does it run OK at the moment ? Running 33mm flatties on Slabby Racer 1 and Slabby Racer 2 with 140 and 145 jets. No filters and Micron 4-2-1 and Nexxus 4-2-1 front pipe and unknown silencer. Nexxus and unknown silencer much better set up. I'd say the carbs were a touch too big. Done some calcs toight for my own bikes and 33mm choke is perfect for a 750 at 13k rpm which a slabby won't go yo. Quote Link to comment
Funkymonkracing Posted July 6, 2015 Share Posted July 6, 2015 38mm sound a bit big for a 750 slabby IMO Quote Link to comment
GsxrCol Posted July 6, 2015 Share Posted July 6, 2015 (edited) Supposed to run ok on slingy 34mm cv's, dunno about 38's. I prefer me 29 mm flatties though Edited July 6, 2015 by GsxrCol Quote Link to comment
Pd1987 Posted July 8, 2015 Author Share Posted July 8, 2015 Balls! Has anyone got a set of flatslides that are actually in good condition then? And some rubbers Quote Link to comment
kokolis Posted July 8, 2015 Share Posted July 8, 2015 150 is way too much for the slabby 750 Quote Link to comment
Rossco(Iceman Josros) Posted July 9, 2015 Share Posted July 9, 2015 VM29's are getting very thin on the ground these days boys Quote Link to comment
kokolis Posted July 11, 2015 Share Posted July 11, 2015 (edited) Soon, I expect to have 2 sets of vm29ss.....lol Edited July 11, 2015 by kokolis Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.