paddle Posted February 16, 2021 Posted February 16, 2021 Hi everyone I just picked up a 1200 blandit that has been standing a few years I also got a box or spares which I found a dyno jet box in.the bike runs like crap so would it be better to go back to basics and remove the dyno jet kit I also found 16 fouled spark plugs in with the spares.its fitted with a micron delta system which looks like a quality exhaust but being that micron died a while ago is this a good system to use.your infinite wisdom is greatly appreciated Quote
TonyGee Posted February 16, 2021 Posted February 16, 2021 first thing is to get the carbs off and give em a good clean first, but make sure you bench test them before you refit them. Quote
Joseph Posted February 18, 2021 Posted February 18, 2021 Their carbon cans will be rather fragile 15 to 20 years down the line but the headers are very good in terms of quality and flow. I had a serpent header on my ZX12 it did look quite the part too Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.