Cárb rubber hell

[bernardo]

I have the usual concrete carb rubber problem on my slabby. I need to get the carbs off but no amount of heat will shift them and being afraid of breaking some thing, my hacksaw is looking inviting.

Not going to use them again so can I cut the rubbers off or am I missing something

 

[clivegto]

More heat, you don't want bits of rubber going down the ports.

[Dezza]

Try covering the rubbers with rags, then soaking the rags with boiling water.

[Duckndive]

I  find pushing the carbs downwards often breaks the seal....

and make sure you have the clips completely off........

[bernardo]

Thanks guys I'll give it a go.