GSX 1100 ET

[bigyellowthing]

Hi Guys

Anyone know whether a Kawasaki dished sprocket fits an 81 1100?

I'm aware of grumpy1260 and performance spares but £60+ seems a touch steep and if there is a readily available alternative...

Any help appreciated

[wraith]

I think output shaft splines are the same on both, the main thing is the Suzuki has a nice big nut to hold it on the kwak has a bolt into the shaft and a tab thing.

[bigyellowthing]

Cheers Wraith.

Is there any alternative to a £60 job or should I just stop being a cheapskate?

 

[Dezza]

xfam in Japan sell a range of great quality offset front sprockets for about 60% of the cost in the UK (at least they used to). I have one on my EFE engine and I think someone here later did a bulk buy for mainly gsxr sprockets.

 

The page that listed alll the race sprockets is no more but I remember I filled in the contact form and asked if they did offset sprockets and got one by faxing a credit card number. The sprocket was <30 quid including postage from Japan but that was a few years back though.

 

https://www.xam-japan.co.jp/

Edited June 5, 2019 by Dezza

[wraith]

I know what you mean, £60 for a front sprocket is a lot.

Depends on how much you need to space it out (not the drugs way before anybody gets all high and mighty ) back to the plot, if it's go to 6mm or so you can always use a spacer behind the standard sprocket, any more then that and you will be coming off the shaft splines.

Or/and you could remove some meat off the rear sprocket carrier.

 

[cheshirekat]

Kawasaki do an offset front sprocket its off a zx6r part No153215 it has a 8mm offset used one on my katana

[Dezza]

1 hour ago, cheshirekat said:

Kawasaki do an offset front sprocket its off a zx6r part No153215 it has a 8mm offset used one on my katana

Yep, that's another alternative but you'll have to do a full 525 conversion.

[jb]

think this is the one your after for a 630 chain......

http://www.jtsprockets.com/catalogue/model/1314/

[BigT]

PBI sprockets makes offsets

https://shop.pbisprockets.com/category.sc?categoryId=71

[arnout]

On 6/6/2019 at 12:12 AM, Dezza said:

..

The page that listed alll the race sprockets is no more but I remember I filled in the contact form and asked if they did offset sprockets and got one by faxing a credit card number. The sprocket was <30 quid including postage from Japan but that was a few years back though.

..

https://www.xam-japan.co.jp/sp-top/sp-offset/

[bigyellowthing]

Cheers chaps.

I'm very grateful for your help.

Just to clarify.

I have a 530 chain, GSXR 750 (h?k?) Swing arm (machined to fit), 4.5" rim, 160 tyre, twin shocks, and ambition that exceeds my talent.

[Anders74]

Any Kawasaki front sprocket 530 with offset to Suzuki? = )