Nigkat Posted May 1, 2019 Posted May 1, 2019 (edited) Fitting a mk2 bandit 12 engine and wiring loom to my Red herring project. I'm using a motogadget m-lock keyless ignition switch, so understand I need to Fit a resistor, 100 ohm ? into the loom between the CDI unit and the ignition switch. Can you shed some light on where to put it. Want to remove the side stand switch to and I think I need a diode? What size should I use? Electrics definitely not my strong point. Cheers Edited May 1, 2019 by Nigkat Quote
wraith Posted May 1, 2019 Posted May 1, 2019 (edited) This is what I got in my post on same thing don't know how to do a direct link to the post, so hope this helps with one of your questions. Side stand cutout By wraith, November 10, 2018 in Oil Cooled Edited May 1, 2019 by wraith Add a bit Quote
370steve Posted May 2, 2019 Posted May 2, 2019 I think that the Motogadget M-unit has a side stand circuit as standard? I have just bypassed all that shite with mine! might look into doing the sidestand at a later date though Quote
Nigkat Posted May 2, 2019 Author Posted May 2, 2019 Thanks, something for me to work with. I'll see how I get on Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.