gray711 Posted September 3, 2015 Posted September 3, 2015 The one thing that's only ever disappointed me over years with the slabby is the lack of options for swinging arm swaps due to the linkage.Now seeing as I'm no geometry or fabrication wizz, my only option is to add a brace to the arm.I know this is a bit of an age old question but what are my best options in the way of adding a brace to a stock 750G arm. I seem to remember certain R1 braces being the way to go? I'm thinking of getting shot of the braced & extended one that's on my 7/11 at the mo, as I want to put my stock length swinging arm back on but ....... A. It'll need a brace for the extra oomph.B. It looks like the weedy kid in the playground.cheers ....... Quote
clivegto Posted September 5, 2015 Posted September 5, 2015 Just done this, it is a early r1 brace and a bit of flat bar. More pics in projects under Me NWS slabby. 2 Quote
gray711 Posted September 6, 2015 Author Posted September 6, 2015 That's just the ticket, early r1 arms aren't too expensive. Quote
Wescooley19 Posted October 12, 2015 Posted October 12, 2015 One i did earlier.....couldn't find the unobtainable H section Yoshimura use so i used 25x25x3 ally box! 1 Quote
gray711 Posted October 12, 2015 Author Posted October 12, 2015 Nice!Well I found a R1 arm for £16 which promptly met with my grinder. Just need to get a new flap wheel to get the old weld off....Job for this weekend 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.