et1170

first 11 second run by Carl , bike ran a treat , back at the pod in a couple of weeks to get down near the 10`s

Carl had his first few runs today at Santa Pod, he had 2 runs in the 11,s with 116mph terminals which is an amazing start. Last run on a drag strip was when he was 15 on an rg125 . Sounded great too.

Points after the rained off first round of acu etbike. Thanks to eurodragster.

Took the finished article over to my Dads house in the van. He was well impressed , booked in for a test day at Santa Pod this Saturday. I will give it a test run or 2 to make sure it's all ok then let Carl loose on it for the rest of the day!

Just back from the Springspeed Nationals at Santa Pod , round 1 of the ACU championship. Rain meant we had one qualfying run on saturday and one on sunday , then the event was called off before eliminations! My first run of the year on Saturday saw me dial in my pb time of 8.98 seconds , thinking that if I went too quick and broke out at least it would be a pb. 2 more teeth on the rear and a little less weight on the lock up clutch being the only changes from last year. The Kat hooked up pretty well and stormed to 8.99 seconds at 147 mph , this was enough to give me number 1 qualifier spot in a 13 bike field which was unbeaten on the second run. shame we couldnt do any elimination runs but the bike is in good fettle and I will lead the championship going into the Festival of Power at the end of June. Happy days!

Well, easter was missed. Entered in etbike at the Pod on May 22nd weekend for first round of acu championship. 13 entered in the biggest UK bike class. Looking forward to trying it out with new gearing , should really fly now, or spin!!

Spent today fitting my home brewed 3 piece fuel tap, not much room between the tank and carbs, managed to squeeze the pipework in. No leaks as yet, did a quick fire up but not for long , dont like annoying the neighbours on sunday! Headlight properly fitted and all cables seem to run ok around the headstock. Air shifter is firing ok on the button , nearly ready for a test run .

I used the selfie side of my phone, guessing that does that? Strange.

Video of the second start up, well happy with it. Now to tidy the wiring up and a few finishing touches.

Timing plate arrived today, generously donated by Duckndive , timed her up and rigged a temporary fuel feed. Will try for her first fire up sometime tomorrow. Fingers crossed.

Cleaned it up and stickers it.

Before

Thanks for your input, am going with 1 big relay as worked well on my Kat , will look at the lanyard position, will be attatched to his right wrist rather then leathers or whatever.

Keeping my wires organised.

Valve clearances good so cam cover on and now to move on to my least favourite part, wiring it up! Wish me luck.

New rear brake line arrived so managed to get front and rear brakes bled without too much drama, rear took a while to get through but seems good now. Cam cover gasket turned up from wemoto also , just need to check valve clearances and I can then close the engine up . Running the engine as it was removed from the Kat at the end of 2019 while Carl gets to grips with it. Then it's up to how much he wants to spend on it.

Got rid of the high rise renthals and fitted some nearly straight bars. Much better feel.

All I managed today was to cut and stick some foam on the seat! New pegs on the Kat though!

V & H fitted.

Yes mate, Carl liked em. Goes well with my Kat.

Couldn't resist trying on the body kit. Top job of painting by Havoc. Highly recommend his work and a top bloke to boot.

Rs 36,s fitted, chain on and measured the chain adjuster marks on the swinger and they are spot on after my basic jigging up of the 2 bandit arms and Jon's tidy welding. Breather tank fitted properly . Front cowl and headlight fitted but brackets a bit flimsy so looking at beefing that up tomorrow. Beer oclock.