CockneyRick

It's bathed in oil, i'll ruin the kitchen cutting glass

Put a Bandit side well sump on a GSX1100F lump with a new gasket. No sealant, just straight on & bolted up diagonally not following the bolts round. The bike has run twice for about 5 mins each time but never moved, & there's oil all around the whole circumference of the sump join. At first i thought it could be the cooler pipes at front, but the fact the oil is pretty much everywhere i'm just wondering? Anybody had one that warped before?

Looked & there are plenty of choices for a good price. Shame the adapter plates alone are at least double the tap price!

Got a link to them?

Yep, seriously have no interest in paying £150++ for an overpriced sieve!

Seems like a lot of work just for a simple tap swap for me!

Had them before & tbh i'm really not impressed with em for the cost. So would rather avoid.

Anybody tell me a good fuel tap to use, GS1000 tank with 44mm hole spacing running to the VM33ss so has to be single outlet with no vac? CutNpasted from my build thread as no response.

it gets weirder, every one that's up for sale used or new on both the SRAD & K1-3 do not have these shims. Even the wheel i'm swapping over when i assembled it never had them? I'm just thinking to say sod it & fit the spacer tube without em?

Excellent, thank you peeps, i'll get it reassembled now

Well i never knew that! Although it obviously makes sense Every days a school day

And that's the wide side on view. If i had to guess i'd say that side belongs on the right. But that's only cos the spindle is wider on that side, even though it wouldn't make any difference once bearing is in?

Exactly, they're electronic speedo!

I swear i'm having a blonde moment here, but which way does the rim go? It's stripped after P/coat & i have the wide & narrow openings to the bearing seats. What size goes to what side?

So that's a K1-3 pic, strangely i thought the SRAD wheel was the same but the spacer isn't P/No: 54731-33E10 & that was what i priced it on £53.66!

Can't find em myself, just shows spacer at £53?

Kinda makes sense, but i've never come across em in all the bearings i've changed before. And as said, they don't show on parts fische? So how do i replace the knackered one?

Just knocked the bearings (6205 RS) out of a GSXR Srad, early K series front wheel & got these 2 shims? As you can see i mangled one cos i didn't know they were there & parts fische for 96/99 & K1-3 models don't show any? Bearings were rubber sided on 1 side only. Always thought std bearings from factory were metal shielded 1 side so may have been changed before, but what are the shims?

I run 520 on both my bigbored GS1000 & my Efe

Ah yes, clearly wherever i got it there were no spacers supplied?

I assumed cos one has the stepped mounts, that the pressure discs might be different. So in that case, not sure what the LH one is for?

I'm led to believe GS & GSX are the same, but both in pic were meant to be GS?

Strangely the RH one is what @Gsxrsammade me, the one on left i have no idea what/where it came from!

Already have, Roger, SPS, Grumpy & Sam baker haven't got any. Now trying Gary (Gen) & he'll get back to me

I have a GSX lockups, but the spacer is totally different to a GS