Gixer34
Members-
Posts
31 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Gixer34
-
Try www.suzuki.org . It lists all suzuki motorcycles ever built aledgedley
-
Cheers Nick, New plugs, fresh petrol and a new battery got it sorted. Old battery had enough life to turn it over but not enough to give her life!
-
Hello just bought a 2001 TL 1000s and theres no spark has any one got any pointers please . Turns on fuel pump primes and it turns over but no sign of spark. There is power to the coils.
-
Srad top yoke/fork......
Gixer34 replied to CockneyRick's topic in Water Cooled, V-Twins, Singles and 2-strokes
If it's going on a drag bike I don't suposse it really matters does it? -
Just though I'd show you my 750.
Gixer34 replied to bluedog59's topic in Water Cooled, V-Twins, Singles and 2-strokes
Re rack the carbs. Surely adding bits in will lengthen the inlet and create issues? I don't know -
The irresponsive pull from standstill could be sprocket related, not sure what standard GS gearing should be, might be worth checking
-
Just though I'd show you my 750.
Gixer34 replied to bluedog59's topic in Water Cooled, V-Twins, Singles and 2-strokes
A friend of mine got some inlet stubs from an american/canadian model to fit flatslides to his race bike ,they were a different size to the british model. I'll find out the details if you want. -
Bike is being built from bits and lets face it any weight saving on an EFE is a benefit!
-
Thanks for all the responses , gonna do some phoning tomorrow and see what prices come back.
-
Wanting to use a Lithium battery but was wondering what size Ah i can get away with ? Where's best place to buy? It's a Gsx 1100 efe. I'm basically trying to reduce weight. Any thought gratefully recieved. Thanks
-
I used a heat gun to warm the rubbers. Its an EFE so as said its a bit easier
-
Got a Hagon in the shed if you intrested, msg me
-
Not sure of ratio. It also has Teflon coated kit pistons,which you have to fit when you have kit valves. Coz the valves are flat and standard valves have a hollow face . I did gap the clearance head to piston and used thinest possible gasket.
-
The head that's on is a Mezz one with kit valves and springs that I got off phase one a few years back. I was just looking at further development.
-
They did. But the topic says"750 wt"
-
Didn't think they made a 750wt that wasn't srad
-
?
-
Oldskoolsuzuki track-day and get together Cadwell July 2016
Gixer34 replied to terriblethunderlizard's topic in Events
Can I still book? Several years short circuit and 7 years of manxgp. Got a srad (carb model) and a gsx1100 efeR thing! -
Hello, just wondering if anyone has done the cam swap on a WT where you put a 1000 inlet cam in the inlet side and the 750 inlet in the exhaust side. Think i got that the right way round. I know its been done on K series but not sure about W's
-
Oldskoolsuzuki track-day and get together Cadwell July 2016
Gixer34 replied to terriblethunderlizard's topic in Events
I'd better get busy -
Looks good, but whats the seat made from?
-
Yes. My race bike was total loss!
-
Ok vizmman. Think early oil boiler is same as efe on pick up side but any info gratefully received. Ta
-
Thanks Very much. Thats more than I was hoping for. Saved me a lump of time looking