Jump to content

Recommended Posts

Hi all,

  I'm in the process of a rebuild on a 93 750. While it's in bits I was considering trying different sprocket sizes with a view to modestly increase acceleration. What do you guys run and to what effect please?

Share this post


Link to post

Thanks mate. Looks like a pretty cool site. Only issue is the bike is in bits and I haven't even ridden on it yet so I have no idea regarding what values to put into the graph. Just looking for some recommendations really

Share this post


Link to post

if ya just want better pull away then 14/42 is what i use to run, you won't need anything else. still has enough top end to pull over 150mph. ya might need to put some weight over the front on pull away tho.(y)

Share this post


Link to post

A 14 tooth is a bit harsh on chain so 15 / 45 will give same ratio as 14 / 42 and what I used on my 1100 so could be a bit tall for acceleration on a 750? Maybe 15 / 48 might be better?

Share this post


Link to post

standard is 15/42 . need longer chain to run 45t rear. tho not a big problem if bigger rear is better on transmission.

Share this post


Link to post

Gixxer1460 told me once try to aim for a ratio of around 3.00 which helped me decide what size sprockets to buy...I used this pic as a quick reference too

motorcycle-sprocket-drive-ratio-chart.jpg.b55ff815d7d609f899d169dedde30a09.jpg

 

 

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×