Bandit with GSXR 750 OR 1100 Engine?

[R1bandit1100]

Hello, 

I've decided to start my first project and so far I have myself a 98 bandit 6 with a 02 R1 subframe. 

I currently have a 91 750 Gsxr engine but it's giving me alot of grief, so really tempted to sell it all and get a 1100. What year fits into the bandit frame? 

Also wondering what's the best swing arm, brakes, forks to use? 

I've got an R1 shock, and looking to go with gsxr 1300 forks. 

Any advice would be much appreciated 

Thanks

[Blue]

Hi I believe the difference between 6 & 12 frame is the rear pegs therefore any of the oil cooled will fit, best forks to fit depends on what you want from the forks & how deep your pockets are 

[fatblokeonbandit]

The frame dimensions are the same, the only differences between the 600 and 1200 are the rear peg hangers like Blue said, the rear bottom engine bolt hole is 10mm on a 600 12mm on a 1200, so needs drilling out, the bottom triangular engine mounts are welded on on a 600 bolt on on a 1200, the 1200 has an extra brace between the front engine mounts and the lock stop tab on the frame is wider on a 600 than a 1200. 

so yes any oil cooled will fit

 

as to the rest of it it depends on how much money you have

[fatblokeonbandit]

Ive had 7 different front ends on mine over the 21 years ive owned it, this is the best forks and brakes yet.. 2015 hayabusa resprung for my fat arse

 

[wraith]

Welcome to OSS, we like pics  lots of pics.

Can't say much more than the two above  have a look at the project pages for some very good ideas  if you have the 600 are you going to put a bigger rear wheel in?

 

[wraith]

2 minutes ago, fatblokeonbandit said:

Ive had 7 different front ends on mine over the 21 years ive owned it, this is the best forks and brakes yet.. 2015 hayabusa resprung for my fat arse

 

You are not fat, just very big boned