Mark 1 and 2 Bandit 1200 loom

[Hutch]

what are the differences between a Mk1 loom from a Mk2 ? I have a Mk1 engine for my Kat and a Mk1 CDI and i been offered a Mk2 loom at a good price

[fatblokeonbandit]

Its no good the cdis are different and the plugs are too, its easy to fit all mark 2 leccy parts to a mark 1 engine though

[wraith]

The cdi plugs are different between the mk1 and mk2 ? 

And the mk1 has a worm drive speedo the mk2 has a electronic Speedo ?

[fatblokeonbandit]

Also the allternator, ignition pick up and neutral switch plugs are differant

[Hutch]

Mk1 it is then, cheers guys for the advice. Any one got one??

 

[wraith]

Also the mk1 96 had a different cdi to the 97 onwards  found this out the hard way 

[clivegto]

27 minutes ago, wraith said:

Also the mk1 96 had a different cdi to the 97 onwards  found this out the hard way 

Didn't know that.

[Cobby]

There's also differences between UK and USA/Canada spec bikes

[fatblokeonbandit]

2 hours ago, wraith said:

Also the mk1 96 had a different cdi to the 97 onwards  found this out the hard way 

Thats the pre production ones, they all had 1156 stamped on the barells and rf900 swingers and gsxr type  looms and cdi's and no bottom triangular engine mounts, not many about but a bugger to get bits for if you dont know

[wraith]

As always @fatblokeonbanditfont of all knowledge on bandits 

So looks like I have a cdi for a pre production and if it works in a gsxr1127 I will keep it otherwise it's spare and will be out up for sale at some point (when I can figger out which box it's in )

[fatblokeonbandit]

Certainly not a "font " of anything,!!  ive just had 17 of the things so picked up a few bits of information,,soon to have number 18 i hope