Ignition timing on 1100efe

[Jonny]

Hi all,

 

Just a quick one. Is it possible to adjust the ignition timing on this engine or is it fixed?

Obviously I know on the old points ignition GS motor you could but not sure if on an eye if it set at the factory and that's that. 

I have Googled it but nothing comes up. 

Thanks,

Jonny

[Blubber]

The efe has electronic advance. 

For us mere mortals..

you cant change those settings. 

 

You can slot the Base plate to advance or retard all of the settings by max 4° (roughly) 

[Jonny]

28 minutes ago, Blubber said:

The efe has electronic advance. 

For us mere mortals..

you cant change those settings. 

 

You can slot the Base plate to advance or retard all of the settings by max 4° (roughly) 

So in other words... It must be right?

 

[Blubber]

For normal Road use: yes

[Jonny]

17 hours ago, Blubber said:

For normal Road use: yes

Many Thanks Blubber.

[nlovien]

one thing to watch out for on any older (used) bike engine ref: ignition is for any wear where the ignition rotor is pinned to the crank - any feel of movement before you nip up the bolt can easily cause a 5 deg shift on base timing value ( the pre set ignition advance is relative to the base value)