dynojet kit

[ET81]

hello guys, im having troubles to find a dynojet stage 3 kit for the original carbs of a second gen teapot 750. 

I have dual K&N pods and an open exhaust on the bike. I've welded a lambda sensor in my exhaust so i can sea the AFR. He's quite lean on the throttle. Idle is good.

It looks like dynojet doesn't make stage 3's for the teapot carbs, or does anyone have an address maybe?

Thanks in advance, Robin

[Madb]

they appear to do one for 1989-1997 stage #1 and #3

but only do the stage #1 after 1998-

thats on the U.S. site.

have you tried Factory pro?

[Duckndive]

Dyno jet kits are overrated IMO.  Why don’t you start by lifting the needles to the bottom notch and see what difference it makes 

but I would guess you will also need to up the mains a far way as well      

But you could pick up a set of No drills and 4 mains a lot cheaper than a Dyno#uck kit 

[wraith]

Here is Dyna UK office number 01995 600500, they are very helpful and do the work on site so the lads in the tec/workshop know what they are talking about, helped me no end in the past.