Swirl Posted November 17, 2017 Posted November 17, 2017 Gsxr 750m engine had water damage so picked up a 2nd hand head, have bought cometic gasket set and valve stem seals, I'm after a set of piston rings, where's the best place to buy a set Quote
Swirl Posted November 17, 2017 Author Posted November 17, 2017 Would I be better off with a big block all advice welcomed Quote
canamant Posted November 19, 2017 Posted November 19, 2017 You could fit the 748 liners and search for a set of pistons that will fit but the machining costs are a bit steep for 4 aluminium bores and then 4 liner bores. I toyed with fitting an 1100 barrel on a 750 long stroke and getting pistons out of a modern engine but the amount of meat you need to remove to get the deck height right would not leave sufficient flange (ooh I said "flange) at the top or bottom of the barrel to maintain strength. Quote
davecara Posted November 19, 2017 Posted November 19, 2017 @Swirltry Lymm Engine Components or Kings in Liverpool Quote
suzook12 Posted November 25, 2017 Posted November 25, 2017 Oddly recently sold a 750M with water damage..... Quote
Swirl Posted November 25, 2017 Author Posted November 25, 2017 (edited) This one come from r1guy a while ago Edited November 25, 2017 by Swirl Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.