Srad top yoke/fork......

[CockneyRick]

Anybody got a pic of it? need to know how much fork sticks above yoke & where clip ons sit & mount on 54/56 forks? 

Edited August 9, 2017 by CockneyRick

[bernardo]

I ran my fork tops 10mm above the top yoke for racing and have them at 5mm now.  Seems OK to me. The clip-ons mount flush with the bottom of the top yoke in standard position.  Not at home for a few weeks so I can't post a pic

[fatblokeonbandit]

in standard from they are flush with the yoke

[bernardo]

Yes but I found the handling much improved by dropping them. Each to their own I suppose

[Madb]

standard fitting is 2mm showing above yoke if any help.  set my mates up  to show 5mm  above yokes. handles sweet. thats 750 

[CockneyRick]

Tis going on the drag bike, so will prob look at 5-10mm as a start. Just needed a reference point. No need for pics now @bernardo   

[Gixer34]

If it's going on a drag bike I don't suposse it really matters does it?

 

[bernardo]

If you drop them too far you affect the trail which might make it unstable.  Mind you a good steering damper would solve this. Don't forget about clearance between the wheel and rad

[CockneyRick]

12 hours ago, Gixer34 said:

If it's going on a drag bike I don't suposse it really matters does it?

 

As said, a reference point!